Car Door Edge Protector Anti-Scratch Protection Strip Trim Seal Rubber Strip DIY

Features: 

– The door edge guards will protect your vehicle from nicks, chips and scratches, for most universal car. 

 

– They are U channel design just press the rubber seal on the car door edge and it can hold it tight, rubber seal strip build in stainless and with 4 fixed slices, completely tightly fit, no drop-off and improve noise reduction. 

 

– The U shaped edge protector manufactured from PVC rubber, waterproof, isolator noise, corrosion resistance, high-temperature resistance, wear resistance, anti-aging, UV resistance. 

 

– The door protector strip install place: In the metal edge of the car body between the car door and car body. In the external edge of the car door and more. Also can be use in the window above the car. window panel minibus. covering the edge of the sharp metal. 

 

Specifications: 

Colour: Black White Blue Grey Red. Contact the seller for colour chose!!!

Material: Silicone + Steel 

Length: 5m 

Width: 10mm 

Grip range: 1.0mm to 2.5mm 

Fits for: 4 doors (Front and Behind) 

Package included: 1 x 5M Protective Strip 

 

 How to install: 

 

1. Clean the door edge to remove any oil, wax & dust. Make sure the door is dry before continuing. 

 

2. Uncover the tape from the tip of the lining (Ensure the tape is install inside the door. 

 

3. Start from the top, insert the lining onto your door edge until the lining is fully seated. 

 

4. Press the lining with your thumb along the door edge until it is fully seated. 

 

5. Repeat step 4 until all edges are protected. 

 

6. Use scissors to cut away unused lining for other door edges.